List of 1-Wire  programs for Windows (Win98 or WinXP):

No installations required, programs run from own directories; Supports AAG Weather centre (V2) and most AAG modules.

See also AAG replacement rain gauge cover and MaximIntegrated / Analog Devices for individual devices

Serial (current version V11 August 2014) *

The program is used to capture information from 1-Wire devices. It runs in a DOS window and writes the data into a text file for use by VB or other programs. Uses the DS9097U-009 serial interface adapter.

Supports read/write: DS9097U-009(DS2480B), DS1820, DS2405, DS2406 (DS2407), DS2502, DS2436, DS2423, DS2450, DS2438, DS2408, DS2890, DS2413

(Family codes:  0X05, 0X09, 0X10, 0X12, 0X1B, 0X1D, 0X20, 0X26, 0X29, 0X2C, 0X3A)

USB (current version V11, August 2014) *

The program is used to capture information from 1-Wire temperature devices. It runs in a DOS window and writes the data into a text file for use by VB or other programs. Process synchronised with the serial process, if running.

Requires the USB driver, included for the DS9490R interface adapter.

Supports : DS9490R and DS18S20

Monitor

The program is used to show captured information from the text file to verify correct functioning..

Download Zip (V11) (August 2014)

Download Zip (V10) (March 2013)

* Of special note, DS18S20 devices all converted simultaneously to reduce the delay of processing them sequentially.

Also see SNTP in the PC program section for good time synchronisation on old or wayward PCs.

Note:The USB to serial converter from Plugable [based on the PL2303HX rev D chipset] is
supported by Windows 8, which has no serial ports. Also works on Windows 7

Also the EXSYS EX-1352 PCMCIA card which has two serial connectors and works fine on Win98SE. 

Version 11 (August 2014) now supports power status reporting of DS18s20 devices and has improved reliability and error reporting