Fitbit SimpleVibrate Operations
(last update 2021-08-27 Version 4.3.03 - Version 5.3.03 [Versa 3 & Sense])
A utility to test vibration on a watch
 Vibration control panel |
Quick Guide
Navigation
| Tap one of the 3 selectable fields |
| Type - allows choice of the 8 vibration patterns below |
| Loop - how many times to
vibrate |
| Delay - how long to wait before the next one |
The objective is to find the smallest delay where the number of completed vibrations
are the same as the number of requested vibrations [Loop].
This will give you the duration for a single vibration of the pattern selected.
or 
buttons to change the value of the selected fieldThe field will continue scrolling values for as long as the button is held.
- For each pattern selected the Delay value in ( ) from the table will be applied.
- It can be adjusted manually but is a good starting point
| Vibrate pattern |
Ionic ms (1/5 ms) |
Versa Versa Lite ms (1/5 ms) |
Versa 2 ms (1/5 ms) |
Sense Versa 3
ms (1/5 ms)
|
| Bump |
115 (23) |
125 (27) |
60 (12) |
|
| Confirmation |
215 (43) |
225 (45) |
80 (15) |
|
| Confirmation-max |
215 (43) |
225 (45) | 85 (17) |
|
| nudge |
415 (83) |
375 (75) |
120 (24) |
|
| nudge-max |
415 (83) |
375 (75) | 120 (24) | |
| ping |
415 (83) |
375 (75) | 280 (56) |
|
| alert |
continuous | continuous | continuous | continuous |
| ring |
continuous |
continuous | continuous | continuous |
Reference Documentation:
- Standard documentation - How to use the basic vibration.
- Additional documentation - Specifies extra parameters, however they don't seem to have an effect.
-
So the Repeat, Duration, Strength fields are reserved for future use
Other features
- To do an immediate close of the SimpleVibrate, press the back button.
- Or after a couple of minutes the App will auto close.
- On close the clock will be shown again automatically.
Vibrate releases (V4 - Ionic & Versa's, V5 - Sense, Versa 3)
Vx.3.03 - 2021-08-25
- Initial release